Darkglass DG210A 500w 2x10" Bass Combo Amp

• Input: Use this jack to connect your instrument via a standard ¼” mono cable.
• Headphone Output: Connect your Headphones and enjoy the analog cabinet emulation.
• Passive/Active: Use this push-button switch to change from passive to active mode. If your bass is active it can have a hotter signal making the amp to distort early (feel free to use if such additional distortion is desired).
• Compression: Controls the amount of dynamic compression. The make up gain is adjusted automatically.
• Drive: Controls the amount of distortion that the Microtubes Engine will deliver. Press to select the drive mode: OFF/Vintage Microtubes /Microtubes B3K.
• Blend: Use this knob to mix between the Clean signal and the Distortion signal.
• Level: Controls Microtubes Engine’s output volume.
• Low: ±12 dB @ Low shelf
• Low Mids: ±12 dB @ 500 Hz/1 kHz
• Press to select the frequency
• Hi Mids: ±12dB @ 1.5 kHz / 3 kHz
• Press to select the frequency
• Treble: ±12dB @ High shelf
• Master: Use this knob to control the overall volume of the combo. Press for Mute.

Specs: